Practical coverage
The 3/4-inch width covers common plumbing threads efficiently and helps maintain an even wrap.
Always On Duty
Engineered Like a Soldier. Tested Like a Guardian.
Home / All / PTFE Tapes / White Plumbers Tape / 19 mm × 15 m × 0.20 mm White PTFE Thread Seal Tape for Water Pipes
19 mm × 15 m × 0.20 mm White PTFE Thread Seal Tape for Water Pipes
| Share | |
|---|---|
| Categories | White Plumbers Tape |
| Brand | FOREVERSEAL PTFE Tapes Manufacturer |
| Model | TF19-40/0.3 |
| Brand | ForeverSeal |
| Business Type | PTFE Tape Manufacturer |
| Specification | 19 mm × 0.20 mm × 15 m |
| Model | TF19-40/0.3 |
| Apparent Density | 0.25–0.35 g/cm³ |
| Color | White |
| Composition | 100% PTFE |
| Declared Material Temperature Range | −190°C to +260°C (−310°F to +500°F) |
| Tensile Strength | 8 MPa |
| Elongation | 25% minimum |
| Declared Chemical Range | pH 0–14 |
| Certifications | ISO 9001, DVGW, CE, UL, RoHS, WRAS, ACS — application scope must be confirmed |
| FOB port | Shanghai/Ningbo |
| Terms of Payment | L/C, T/T |
| Download |  |
Detail Information
19 mm × 15 m × 0.20 mm · Model TF19-40/0.3
White PTFE Thread Seal Tape for Water Pipe Fittings
This 19 mm white PTFE thread seal tape is made for sealing compatible male tapered pipe threads in plumbing and water-line assemblies. Its 0.20 mm film gives installers a substantial layer for controlled wrapping, while the 15 m roll supports routine installation and maintenance work.
- Size: 19 mm wide × 15 m long × 0.20 mm thick
- Material: 100% PTFE
- Apparent density: 0.25–0.35 g/cm³
- Color: White
Why Choose This 19 mm PTFE Plumber's Tape?
Substantial film
The specified thickness places more material in each layer than thinner general-purpose films.
Work-ready roll
A convenient roll length for distributors, plumbing kits, maintenance teams and private-label programs.
Designed for Threaded Water Connections
PTFE plumbing tape fills the small clearances between mating tapered threads and reduces friction during assembly. It does not seal by adhesive. Correct joint geometry, clean threads, proper wrapping direction and controlled tightening are all part of a reliable connection.
Typical applications
- Water pipe fittings and valves
- Shower-arm and hose connections with tapered threads
- Irrigation and general plumbing maintenance
- OEM plumbing kits and retail private-label packs
Use only where the fitting manufacturer and local code permit PTFE thread sealing tape. Do not use it on flare, cone, compression or gasket-sealed connections.
Technical Specifications
| Product type | White PTFE thread seal tape / plumber's tape |
|---|---|
| Model | TF19-40/0.3 |
| Nominal size | 19 mm × 15 m × 0.20 mm |
| Apparent density | 0.25–0.35 g/cm³ |
| Composition | 100% PTFE |
| Color | White |
| Tensile strength | 8 MPa |
| Elongation | 25% minimum |
| Declared material temperature range | −190°C to +260°C (−310°F to +500°F) |
| Declared chemical range | pH 0–14 |
Engineering note: temperature and chemical values describe the declared tape material capability. The allowable conditions of an assembled connection may be lower and depend on the fitting, pipe material, pressure, fluid, thread condition and applicable approval. Request application-specific documentation before specifying the tape for regulated or safety-critical service.
How to Apply PTFE Thread Seal Tape
Inspect
Confirm that the connection uses compatible male tapered threads. Replace damaged or mismatched fittings.
Clean
Remove old tape, sealant, oil and debris from both mating threads before assembly.
Wrap
Apply the tape in the tightening direction, beginning behind the first thread so material cannot enter the line.
Assemble
Keep even tension, follow the specified wrap count and tighten to the fitting manufacturer's instructions.
Consistent Manufacturing for Wholesale Supply
ForeverSeal controls mixing, calendering, stretching, slitting, rewinding and packing in its PTFE tape production workflow. Dimensional checks support repeatable width, thickness, length and density across wholesale orders.
For more information about inspection procedures, visit our PTFE tape quality control process. Buyers developing a retail or distributor range can also review our private-label and OEM/ODM PTFE tape service.
- Custom spool, cover and packaging options
- Production and pre-shipment quality checks
- Order-level specification confirmation
- Support for distributors and OEM programs
Frequently Asked Questions
What is this 19 mm PTFE thread seal tape used for?
It is designed for compatible male tapered pipe threads in water-line, valve, shower, hose and general plumbing applications where PTFE tape is permitted.
Is this tape adhesive?
No. PTFE thread sealing tape is non-adhesive. It conforms to the threads, fills clearances and lubricates assembly as the tapered joint is tightened.
Can it be used for potable water?
Potable-water suitability depends on the exact certification required by the destination market and project. Ask ForeverSeal for the current certificate and covered conditions before specification.
Can this white PTFE tape be used on gas lines?
Do not select gas tape by polymer or color alone. Gas service requires a product explicitly approved for the gas type, pressure, temperature and local code. Ask us for a suitable gas-rated grade.
Can the spool and packaging be customized?
Yes. OEM and private-label options can include spool, cover, label and packing configurations, subject to order requirements and manufacturing review.
Specify before you buy
Request a Quote for 19 mm × 15 m PTFE Thread Seal Tape
Send your destination market, application, required approvals, packing format and order quantity. ForeverSeal will confirm the suitable construction and provide the relevant technical documentation for review.
Related Products
Review
- 加载中···
Please send your message to us
- Name
- *Phone
- *Title
- *Content
Categories
Always On Duty
Engineered Like a Soldier. Tested Like a Guardian.
Foreverseal® Thread Sealing
Pipe Sealing Applications
Work With Us
SunFilm® Advanced PTFE Materials
Company & Resources
